ASIP Header
Monday, December 2, 2024
8:30 AM to 12:30 PM 
Monday, December 2, 2024
  Training
8:30 AM - 12:30 PM
Introduction to Probabilistic Methods with Applications to Probabilistic Damage Tolerance Analysis using the SmartDT software

Instructor: Dr Harry Millwater -
University of Texas at San Antonio

8:30 AM - 12:30 PM
AFGROW Version 5.5 New Capabilities and Features

Instructor: Mr James Harter -
LexTech Inc

1:00 PM to 5:00 PM 
Monday, December 2, 2024
  Training
1:00 PM - 5:00 PM
Fatigue Loads and Damage Tolerance Methods for Airworthiness

Instructors:
Mr James Burd -
Aeronautica LLC


Mr James Burd -
Aeronautica LLC


Author: Mr James Burd - Aeronautica LLC
1:00 PM - 5:00 PM
Practical Risk Analysis Using PROF

Instructor: Ms Laura Hunt -
SWRI

1:00 PM - 5:00 PM
Case Studies in Fracture Mechanics Analysis using StressCheck v12 Enhancements

Instructor: Mr Brent Lancaster -
ESRD Inc

Author: Mr Brent Lancaster - ESRD Inc
Tuesday, December 3, 2024
7:00 AM to 8:00 AM 
Tuesday, December 3, 2024
  Continental Breakfast

8:00 AM to 9:30 AM 
Tuesday, December 3, 2024
  General Session
8:00 AM - 8:10 AM
Welcome
Presenter: Mr James Rudd - Independent

8:10 AM - 9:30 AM
Lincoln Award and Presentation
Presenter: Mr John Brausch - Air Force

9:30 AM to 10:00 AM 
Tuesday, December 3, 2024
  BREAK

10:00 AM to 11:30 AM 
Tuesday, December 3, 2024
  Session 1: ASIP Overviews, Case Histories & Best Practices I
Session Chair: Dr Raymond Kolonay - USAF AFRL/RQ
10:00 AM - 10:30 AM
Realizing Value Through Cultural Change Insights and Parallels from the US Forest Service and A10 ASIP

Presenter: Dr Mark Thomsen -
USAF

10:30 AM - 11:00 AM
Building a Government Owned Engineering Toolset for B1 and Identifying Early Wins

Presenter: Mr Joseph Vondracek -
National Institute for Aviation Research NIAR

11:00 AM - 11:30 AM
Comparison of Methods for Assessing Multisite Widespread Fatigue Damage

Presenter: Dr Lee Zambino -
The Boeing Co

Authors: Mr Jeffrey Sermersheim - The Boeing Co, Dr Lee Zambino - The Boeing Co
11:30 AM to 1:30 PM 
Tuesday, December 3, 2024
  Group Luncheon
12:30 PM - 1:30 PM
Luncheon Presentation
Luncheon Speaker: Ms Lily Arcusa - AFLCMC

1:30 PM to 3:00 PM 
Tuesday, December 3, 2024
  Session 2: Durability & Damage Tolerance I
Session Chair: Mr Wirt Garcia - USAF
1:30 PM - 2:00 PM
Safe-Life Methodology for Metallic Structure

Presenter: Mr Charles Babish -
Air Force


2:00 PM - 2:30 PM
Advanced SIF Solutions for Improved Aircraft Structural Integrity Management

Presenter: Dr Craig Bridges -
Lockheed Martin Co

2:30 PM - 3:00 PM
Evolving Discontinuity State for the F16 Falcon and Successful Sustainment Methodologies

Presenter: Dr Paul Clark -
SWRI

3:00 PM to 3:30 PM 
Tuesday, December 3, 2024
  BREAK

3:30 PM to 5:00 PM 
Tuesday, December 3, 2024
  Session 3: Materials & Processes I
Session Chair: Mr Jeffrey Schweiss - Lockheed Martin Co
3:30 PM - 4:00 PM
Manufacturing for Airworthiness

Presenter: Mr Joel Cooke -
USAF

4:00 PM - 4:30 PM
REACT Applying Advanced Technologies to Solve Sustainment Challenges

Presenter: Mr Kyle Taylor -
USAF REACT

4:30 PM - 5:00 PM
A framework for certification of additive manufacturing and additive repair for aerospace components and structures

Presenter: Dr Kevin Walker -
QinetiQ

5:00 PM to 7:00 PM 
Tuesday, December 3, 2024
  Exhibit Hall Reception

Wednesday, December 4, 2024
7:00 AM to 8:00 AM 
Wednesday, December 4, 2024
  Continental Breakfast

8:00 AM to 9:30 AM 
Wednesday, December 4, 2024
  Session 4: Service Life Extension/Repairs
Session Chair: Mr Ryan Melliere - Boeing Co (Invited)
8:00 AM - 8:30 AM
Development and demonstration of a digital twin framework for airframe life cycle management

Presenter: Mr Yan Bombardier -
National Research Council Canada

8:30 AM - 9:00 AM
C-5 Service Life Assessment: Extracting Life from an Aging Aircraft by Analysis

Presenter: Mr Nicholas Hayes -
Lockheed Martin Co

9:00 AM - 9:30 AM
Testing Analysis of Interference Fit Fasteners An A10 ASIP ERSI Joint Effort

Presenter: Mr Robert Pilarczyk -
Hill Engineering LLC

9:30 AM to 10:00 AM 
Wednesday, December 4, 2024
  BREAK

10:00 AM to 11:30 AM 
Wednesday, December 4, 2024
  Session 5: Structural Testing
Session Chair: Dr Michael Gorelik - FAA
10:00 AM - 10:30 AM
B1 FSFT Importance of fullscale fatigue testing to ensure fleet safety – Lessons learned to increase testing progress

Presenter: Mr Brian Yort -
USAF AFLCMC

10:30 AM - 11:00 AM
Milestones and Performance of the C130 FullScale Wing Durability Test

Presenter: Ms Wendy Hynes -
Lockheed Martin Co

11:00 AM - 11:30 AM
Not All Marker Bands Are Created Equal

Presenter: Mr Jacob Warner -
A10

Author: Dr Thomas Mills - Analytical Processes Engineered Solutions
11:30 AM to 1:30 PM 
Wednesday, December 4, 2024
  Open Lunch

1:30 PM to 3:00 PM 
Wednesday, December 4, 2024
  Session 6: Corrosion Prevention & Control
Session Chair: Mr Scott Fields - Northrop Grumman Corp
1:30 PM - 2:00 PM
Integration of Corrosion Rate with Force Projection Planning

Presenter: Mr Brent Randall -
USAF

2:00 PM - 2:30 PM
Development of Accelerated CombinedEffects Testing at AFRL

Presenter: Dr Chad Hunter -
USAF AFRL

2:30 PM - 3:00 PM
Unique Challenges and Novel Solutions for Detection of Corrosion Pitting in a Main Landing Gear Support Rib Structure

Presenter: Mr Jacob Rindler -
USAF

Author: Mr Nicholas Wandro - OCALC
3:00 PM to 3:30 PM 
Wednesday, December 4, 2024
  BREAK

3:30 PM to 5:00 PM 
Wednesday, December 4, 2024
  Session 7: Nondestructive Inspection
Session Chair: Mr Ward Fong - USAF
3:30 PM - 4:00 PM
Inspection of Fastener Holes – Challenges and Opportunities

Presenter: Mr Nicholas Wandro -
OCALC

4:00 PM - 4:30 PM
Nondestructive Bolt Hole Eddy Current Crack Characterization

Presenter: Dr Eric Lindgren -
USAF AFRL

4:30 PM - 5:00 PM
Extension of B52 Inspection Intervals Through Updated NDI Development

Presenter: Mr Ross Moseley -
The Boeing Co

Thursday, December 5, 2024
7:00 AM to 8:00 AM 
Thursday, December 5, 2024
  Continental Breakfast

8:00 AM to 9:30 AM 
Thursday, December 5, 2024
  Session 8: ASIP Overviews, Case Histories & Best Practices II
Session Chair: Dr Jeff Calcaterra - AFLCMC/EZF
8:00 AM - 8:30 AM
B52 GFEM Progress

Presenter: Mr Andrew Jones -
AFLCMC

Author: Mr Travis Reese - USAF
8:30 AM - 9:00 AM
E7A Wedgetail Royal Australian Air Force ASIP Experiences for FAACertified CommercialDerivative Aircraft

Presenter: Mr David Craze -
Boeing Defence Australia

Author: Mr Peter Apap - Defence Aviation Safety Authority Australia
9:00 AM - 9:30 AM
USAF Fleet Weight Analysis and Weigh Forward

Presenter: Ms Melissa Gray -
USAF


9:30 AM to 10:00 AM 
Thursday, December 5, 2024
  BREAK

10:00 AM to 11:30 AM 
Thursday, December 5, 2024
  Session 9: Durability & Damage Tolerance II
Session Chair: Mr Farid te Winkel - Royal NLR Netherlands Aerospace Ctr
10:00 AM - 10:30 AM
A10 Nose Landing Gear Door Hinge Failure Assessment

Presenter: Mr Michael Worley -
SwRI

Author: Mr Michael Worley - SwRI
10:30 AM - 11:00 AM
On the testing of FA18 Hornet Inner Wing Step Lap Joints

Presenter: Mr Stephane Brunet -
National Research Council Canada

11:00 AM - 11:30 AM
Improved Durability Test Correlation Methods Using Quantitative Fractography

Presenter: Mr David Mauldin -
Lockheed Martin Co

11:30 AM to 1:30 PM 
Thursday, December 5, 2024
  Open Lunch

1:30 PM to 3:00 PM 
Thursday, December 5, 2024
  Session 10: Materials & Processes II
Session Chair: Mr Nicholas Bunnell - USAF
1:30 PM - 2:00 PM
Progress Toward Certification of AM Ti for Primary Structure

Presenter: Dr Dale Ball -
Lockheed Martin Co

Author: Mr Stephen Needler - Lockheed Martin Co
2:00 PM - 2:30 PM
Observations of fatigue crack nucleation and growth in Ti6Al4V fullscale structures under combat aircraft loading

Presenter: Mr Isaac Field -
Defence Science & Technology Group

2:30 PM - 3:00 PM
A Fractography Case Study of FullScale Durability Test FSDT vs Service Experience for a Combat Aircraft Trailing Edge Flap TEF Hinge Lug Bore

Presenter: Dr Ben Main -
Defence Science & Technology Group

Authors: Prof Simon Barter - RMIT University, Mr Mirco Figliolino - Armasuisse, Dr Ingrid Kongshavn - RUAG AG, Mr Jason Rogers - RMIT University
3:00 PM to 3:30 PM 
Thursday, December 5, 2024
  BREAK

3:30 PM to 5:00 PM 
Thursday, December 5, 2024
  Session 11: Loads & Dynamics
Session Chair: Mr David Campbell - USAF
3:30 PM - 4:00 PM
Aerodynamic Loads Prediction and Contribution to System Interoperability Viability Readiness Structural Integrity and Airworthiness for A10C

Presenter: Mr Jacob Beardslee -
USAF

Author: Mr Jerome Jenkins - USAF
4:00 PM - 4:30 PM
Hatch Mounted Antenna Sonic Fatigue Analysis

Presenter: Mr Nathaniel Johnson -
USAF

4:30 PM - 5:00 PM
A Sonic Fatigue Analysis Methodology of a Gun Blast Panel Subject to Gun Firing Acoustic Environment

Presenter: Dr Joshua Lee -
Northrop Grumman Corp

Author: Dr Joshua Lee - Northrop Grumman Corp
X CLOSE WINDOW