SD-22 Overview Part 1 Instructors: Mr Tracy Daubenspeck - NUWC Keyport Mr Jason Voeltz - NUWC Keyport
1:30 PM - 3:00 PM
DMSMS Essentials for Newcomers Part 1 Instructor: Mr Frederick Shope - Defense Logistics Agency Author: Mr Frederick Shope - Defense Logistics Agency
1:30 PM - 3:00 PM
DMSMS Plan Builder Instructors: Ms Nova Carden - NSWC Crane Ms Paula Wade - AMC LOGSA
1:30 PM - 3:00 PM
DMSMS for the Program Manager Instructor: Dr Jay Mandelbaum - Institute for Defense Analyses
1:30 PM - 3:00 PM
GIDEP and Suspect Counterfeit Reporting Instructor: Mr William Pumford - GIDEP
3:30 PM to 5:00 PM Monday, December 2, 2013
Training II
3:30 PM - 5:00 PM
DMSMS Essentials for Newcomers Part 2 Instructor: Mr Frederick Shope - Defense Logistics Agency Author: Mr Frederick Shope - Defense Logistics Agency
3:30 PM - 5:00 PM
SD-22 Overview Part 2 Instructors: Mr Tracy Daubenspeck - NUWC Keyport Mr Jason Voeltz - NUWC Keyport
3:30 PM - 5:00 PM
AS6171 Counterfeit Electronics Detection Test Techniques and Implementation Instructor: Mr Bhanu Sood - CALCE University of Maryland Author: Mr Bhanu Sood - CALCE University of Maryland
3:30 PM - 5:00 PM
DMSMS for the Program Manager (Repeat) Instructor: Dr Jay Mandelbaum - Institute for Defense Analyses
3:30 PM - 5:00 PM
Parts Management Instructor: Mr Daniel McLeod - LMI Author: Mr Daniel McLeod - LMI
5:00 PM to 7:00 PM Monday, December 2, 2013
Welcome Reception
5:00 PM - 7:30 PM
Automated Design Extraction for IC Part Obsolescence and Counterfeit Mitigation Poster Presenter: Mr John Hallman - MacAulayBrown Inc
Poster Presentations
An Accurate New Technique for the Detection of Conflict Minerals and Implications for the Identification of: Counterfeit Products and Sub-Standard Parts Poster Presenter: Ms Catherine McManus - Materialytics LLC
From Re-engineering to Organic Maintenance. Delivering the Unknown On-Time and On-budget Poster Presenter: Mr Brent Carlsen - Space Dynamics Lab
Legacy Sustainment: Innovation for the Next Generation of DMSMS Poster Presenters: Mr Ethan Plotkin - GDCA Inc Ms Kaye Porter - GDCA Inc
Obsolescence Management in the Supply Chain Poster Presenter: Mr David Williams - Through Life Support Ltd
Tuesday, December 3, 2013
1:30 PM to 3:30 PM Tuesday, December 3, 2013
General Session
1:30 PM - 2:00 PM
OSD DMSMS Keynote Presenter: Mr Stephen Welby - OSD (AT&L)
2:00 PM - 3:30 PM
PANEL: DMSMS Issue Impacting Microwave Tubes Across Department of Defense Moderator: Mr K Bryan Mitsdarffer - NSWC Crane (Invited) Panel Members: Mr Kenneth Wetzel - OUSD ATL/MIBP Mr Jason Stroup - SAF/AQRE (Not In Attendance) Mr Brad Botwin - US Department of Commerce Mr Todd Leonhardt - Rhenium Alloys Inc Mr K Bryan Mitsdarffer - NSWC Crane Mr Edward Durell - USAF
4:00 PM to 5:30 PM Tuesday, December 3, 2013
General Session
4:00 PM - 5:30 PM
PANEL: Counterfeit Parts Avoidance & Detection Standards Moderator: Mr Bruce Mahone - SAE International (Invited) Panel Members: Mr Phillip Zulueta - Jet Propulsion Lab Mr Sultan Lilani - Integra Technologies Mr Robin Gray - National Electronic Distributors Association Mr Robert Tipton - Wyle Mrs Kristal Snider - ERAI Inc Mr William Scofield - The Boeing Co Mr David Brown - Intel Corp Ms Debra Eggeman - IDEA Mr Mark Schaffer - iNEMI Mr Kevin Sink - TTI Inc Mr Bruce Mahone - SAE International Authors: Mr Sultan Lilani - Integra Technologies LLC, Mr Mark Schaffer - iNEMI
Wednesday, December 4, 2013
8:00 AM to 9:30 AM Concurrent Sessions Wednesday, December 4, 2013
Basic DMSMS Processes and Methodology - Software Obsolescence Solutions
Session Chair: Mr William Pumford - GIDEP
8:00 AM - 8:30 AM
Diminishing Manufacturing Sources Shared Data Warehouse (DMS SDW) Future Capabilities Presenter: Mr Joseph Stevenson - Concurrent Technologies Corp
8:30 AM - 9:00 AM
Implementing a Proactive Software Obsolescence Program Presenter: Ms Nancy Barcelles - Lockheed Martin Co Author: Mr Timothy Zitkevitz - Lockheed Martin Co
9:00 AM - 9:30 AM
Software Obsolescence Considerations for the SD22 Presenter: Dr Jay Mandelbaum - Institute for Defense Analyses
8:00 AM to 9:30 AM Concurrent Sessions Wednesday, December 4, 2013
Counterfeit Material - Detection and Testing
Session Chair: Mr Bhanu Sood - CALCE University of Maryland
8:00 AM - 8:30 AM
NonElectronic Mechanical Counterfeit Material Presenter: Mr John Butler - NAVSEA SYSCOM Author: Mr Wayne Moss - NAVSEA
8:30 AM - 9:00 AM
Addressing the Threat of Intentionally Compromised Chip Designs Presenter: Mr John Villasenor - UCLA
9:00 AM - 9:30 AM
Exploring the Limits of Testing for Counterfeit Detection Presenter: Dr Brian Cohen - Institute for Defense Analyses Author: Ms Kathy Lee - Institute For Defense Analyses
8:00 AM to 9:30 AM Concurrent Sessions Wednesday, December 4, 2013
Counterfeit Material - Mitigation: Policies, Procedures and Metrics
Session Chair: Mr Robert Tipton - Wyle
8:00 AM - 8:30 AM
Counterfeit Analysis- Supply Chain Issues & Case Studies; Secure Hardware & Data Destruction Presenter: Mr Aaron DerMarderosian - Raytheon Co Author: Ms Morgan Deptola - Technology Conservation Group
8:30 AM - 9:00 AM
How much do you think your supplier knows about counterfeit? Presenter: Mr Yehwan Kim - Moog Inc Author: Ms Terri Montano - Moog Inc
9:00 AM - 9:30 AM
An Overview of Historical Trends Related to Suspect Counterfeit and Nonconforming or High Risk Electronic Components in the global supply chain Presenter: Mr Mark Snider - ERAI Inc
8:00 AM to 9:30 AM Concurrent Sessions Wednesday, December 4, 2013
DMSMS and Manufacturing Readiness I
Session Chair: Mr Gregory Colvin - Honeywell Inc
8:00 AM - 8:30 AM
Obsolescence Management Planning from a Systems Engineering Perspective Presenter: Dr Todd Pobiak - Huntington Ingalls Industries
8:30 AM - 9:00 AM
Additive Manufacturing The Answer to a Logisticians Prayer Presenter: Mr David Ciscel - CalRAM Inc
9:00 AM - 9:30 AM
Moving Manufacturing to the left MBE based Design for Manufacturability (DFM) Pilot Presenter: Mr Roger Provencal - ITI
8:00 AM to 9:30 AM Concurrent Sessions Wednesday, December 4, 2013
Parts Management - Technical Component Issues in Parts Management
Session Chair: Mr Willie Brown - BAE Systems
8:00 AM - 8:30 AM
Use of Plastic Encapsulated Microcircuits PEMs in Military and Space Systems A review of 15 years of actual PEM reliability data Presenter: Mr Joseph Holt - Integra Technologies LLC
8:30 AM - 9:00 AM
The Ever-Decreasing Allowable Temperature Range of Semiconductor Products Presenter: Mr Daniel Deisz - Rochester Electronics Inc Author: Mr Daniel Deisz - Rochester Electronics Inc
9:00 AM - 9:30 AM
So Much Non-Conformance and Too Few Warnings Presenter: Mr William Crowley - QTec Solutions
9:45 AM to 11:15 AM Concurrent Sessions Wednesday, December 4, 2013
Basic DMSMS Processes and Methodology - DMSMS Program Infrastructure
Session Chair: Ms Mary Hart - Defense Logistics Agency (Invited)
9:45 AM - 10:15 AM
Hitting the Road to Achieve Bilateral Communications with Suppliers Presenter: Mr Thomas Sanneman - BAE Systems
10:15 AM - 10:45 AM
Government and Industry DMSMS Team Partnerships - A winning combination, that provides synergy, affordability, and availability to DoD DMSMS programs Presenter: Mr Vincent Spellane - Lockheed Martin Co
10:45 AM - 11:15 AM
From Re-engineering to Organic Maintenance. Delivering the Unknown On-Time and On-budget Presenter: Mr Brent Carlsen - Space Dynamics Lab
9:45 AM to 11:15 AM Concurrent Sessions Wednesday, December 4, 2013
Basic DMSMS Processes and Methodology - DMSMS Program Tools
SYSPARS DMSMS Management Plan Preparation Software Presenter: Ms Nova Carden - NSWC Crane Author: Ms Nova Carden - NSWC Crane
10:15 AM - 10:45 AM
Obsolescence Cost Modeling Presenter: Mr Jason Voeltz - NUWC Keyport
10:45 AM - 11:15 AM
Diminishing Manufacturing Sources Shared Data Warehouse Enterprise Gateway Distribution Center Presenter: Ms Marcia Scott - DLA Land & Maritime
9:45 AM to 11:15 AM Concurrent Sessions Wednesday, December 4, 2013
DMSMS and Manufacturing Readiness II
Session Chair: Mr Walter Tomczykowski - Tomczykowski Group
9:45 AM - 10:15 AM
Equipment Sustainment Engineering Risk Assessment SERA Capability Presenter: Mr Daniel Raubinger - Automation Alley Author: Mr Randy McCauley - Automation Alley
10:15 AM - 10:45 AM
Manufacturing Supply Chain Analysis and Risk Mitigation using MS&A and HPC: Presenter: Mr Dennis Thompson - SCRA Applied R&D
10:45 AM - 11:15 AM
US Space Industry Deep Dive Supply Chain Assessment Presenter: Mr Brad Botwin - US Department of Commerce Author: Mr Christopher Nelson - US Department of Commerce
9:45 AM to 11:15 AM Concurrent Sessions Wednesday, December 4, 2013
PANEL: Counterfeit Q&A
9:45 AM - 11:15 AM
9:45 AM to 11:15 AM Concurrent Sessions Wednesday, December 4, 2013
Parts Management - Catalog and Risk Issues in Parts Management
Session Chair: Mr Ronald Froman - The Boeing Co
9:45 AM - 10:15 AM
Quantifying Electronic Component Risk Cost with Dynamic Technology Assessment Presenter: Mr Doug Palmer - Booz Allen Hamilton
10:15 AM - 10:45 AM
Parts management learning from a commercial and DoD perspective Presenter: Mr William Moss - NSWC Author: Mr Cary Shiao - AT Kearney Public Sector & Defense Services
10:45 AM - 11:15 AM
Distributor in the Middle Pricing Risk to Ensure Program Continuity Presenter: Mr Jeffrey Krantz - Harry Krantz Co
1:30 PM to 3:30 PM Wednesday, December 4, 2013
General Session
1:30 PM - 1:40 PM
DoD DMSMS Program Remarks and Introduction of Speakers Presenter: Mr Alex Melnikow - Defense Standardization Program Office
1:40 PM - 2:20 PM
Using Value Engineering (VE) to Improve DMSMS Management Presenters: Dr Jay Mandelbaum - Institute for Defense Analyses Ms Mary Hart - Defense Logistics Agency
2:20 PM - 3:00 PM
DMSMS and Manufacturing Readiness Presenters: Mr Walter Tomczykowski - Tomczykowski Group LLC Mr Michael Galluzzi - NASA SCRL Principal Investigator
3:30 PM to 5:00 PM Wednesday, December 4, 2013
General Session
3:30 PM - 5:00 PM
PANEL: Strategic Materials Supply Chain Analysis Moderator: Mr Michael Steurer - Defense Logistics Agency (Invited) Panel Members: Mr Gary Gulino - DLA Mr Adam Carroll - Oak Ridge National Lab Mr Jeffery Green - JA Green Co Mr Tracy Daubenspeck - NUWC Keyport
5:00 PM to 6:30 PM Wednesday, December 4, 2013
DoD DMSMS Working Group Town Hall Meeting
5:00 PM - 6:30 PM
Awaiting Confirmation
Thursday, December 5, 2013
9:00 AM to 10:30 AM Concurrent Sessions Thursday, December 5, 2013
Basic DMSMS Processes and Methodology - DMSMS Management and Design
Session Chair: Ms Marcia Scott - DLA Land & Maritime
9:00 AM - 9:30 AM
DLA Land and Maritime's DMSMS Program Office - Long Term Sustainment Support Presenter: Mr Alan Clark - DLA Land & Maritime
9:30 AM - 10:00 AM
Automated Design Extraction for IC Part Obsolescence and Counterfeit Mitigation Presenter: Mr John Hallman - MacAulay-Brown
10:00 AM - 10:30 AM
DMSMS Management and the Use of Common Parts Presenter: Mr Jason Voeltz - NUWC Keyport
9:00 AM to 10:30 AM Concurrent Sessions Thursday, December 5, 2013
Basic DMSMS Processes and Methodology - Raw Materials
Session Chair: Mr Joseph Schwendeman - DOE National Security Campus (Invited)
9:00 AM - 9:30 AM
Proactively Solving DMSMS Material's and Manufacturing Process Availability Issues Presenter: Mr Joseph Schwendeman - DOE's Kansas City Plant
9:30 AM - 10:00 AM
Conflict Minerals Identifying and Overcoming Supply Chain Risk Presenter: Mr Scott Wilson - IHS
10:00 AM - 10:30 AM
Supply Chain Modeling: Downstream Risk Assessment Methodology (DRAM) Presenter: Dr Sean Barnett - IDA
9:00 AM to 10:30 AM Concurrent Sessions Thursday, December 5, 2013
Counterfeit Material - Advanced Detection, Testing and Tracking
Session Chair: Prof Mohammad Tehranipoor - University of Connecticut
9:00 AM - 9:30 AM
SigNature® DNA Marking - An Update on the Authentication Platform DLA has Selected as Part of Their Counterfeit Prevention Effort Presenter: Ms Janice Meraglia - Applied DNA Sciences
9:30 AM - 10:00 AM
Counterfeit Electronic Components from a Test Lab Perspective Presenter: Mr David Loaney - Premier Semiconductor Services LLC Author: Mr David Loaney - Premier Semiconductor Services LLC
10:00 AM - 10:30 AM
Current Status of AS6171 – An Overview Presenter: Mr Sultan Lilani - Integra Technologies
9:00 AM to 10:30 AM Concurrent Sessions Thursday, December 5, 2013
Avoiding Counterfeits in an Aging Fleet Presenter: Ms Nova Carden - NSWC Crane
9:00 AM to 10:30 AM Concurrent Sessions Thursday, December 5, 2013
Parts Management - Parts Management Focus on Obsolescence Solutions
Session Chair: Mr John Angelbeck - Inventory Locator Service LLC
9:00 AM - 9:30 AM
Proactive Actions to Address Microcircuit Obsolescence Presenter: Mr Frederick Shope - Defense Logistics Agency Author: Mr Frederick Shope - Defense Logistics Agency
9:30 AM - 10:00 AM
FPGA Footprint and/or Vendor Conversion Through Die Harvesting, Mapping, and Reassembly to Avoid Complete System Redesign Presenter: Mr Erick Spory - Global Circuit Innovations Inc
10:45 AM to 12:15 PM Concurrent Sessions Thursday, December 5, 2013
Basic DMSMS Processes and Methodology - DMSMS Program Implementation
Session Chair: Mr Alan Clark - DLA Land & Maritime
The Spectrum of DMSMS Part Management Activities Presenter: Mr Tracy Daubenspeck - NUWC Keyport
11:45 AM - 12:15 PM
The Right Tool for the Job - How the various tools and programs fit into the Reactive to Proactive parts management spectrum Presenter: Mr Jason Voeltz - NUWC Keyport Author: Mr Tracy Daubenspeck - NUWC Keyport
10:45 AM to 12:15 PM Concurrent Sessions Thursday, December 5, 2013
Basic DMSMS Processes and Methodology - Lifecycle Mitigations
Session Chair: Mr Nicholas Cushion - DLA Land & Maritime (Invited)
10:45 AM - 11:15 AM
Enhancing System Support with GEM's Bill Of Material Analyses Solutions Presenter: Mr Ted Lenthe - SRI Sarnoff Corp
11:15 AM - 11:45 AM
B2 High Voltage Power Supply Obsolescence and Sustainment in Manufacturing Presenter: Mr Christopher Baker - National Secure Mfg Ctr
11:45 AM - 12:15 PM
Using Environment, Safety, and Occupational Health (ESOH) Drivers to address DMSMS Challenges Presenters: Mr David Asiello - ODUSD Mr William Thacker - Booz Allen Hamilton Author: Mr William Thacker - Booz Allen Hamilton
10:45 AM to 12:15 PM Concurrent Sessions Thursday, December 5, 2013
Counterfeit Material - CHASE Advanced Technologies for Counterfeit Detection and Avoidance
Session Chair: Mr Sultan Lilani - Integra Technologies LLC
10:45 AM - 11:15 AM
Use of Plastic Encapsulated Microcircuits (PEMs) in Military and Space Systems: A review of 15 years of actual PEM reliability data Presenter: Mr Sultan Lilani - Integra Technologies Authors: Mr HungChi Chou - University of Connecticut, Mr Anas Mazady - University of Connecticut, Prof Mohammad Tehranipoor - University of Connecticut
11:15 AM - 11:45 AM
CDC: Counterfeit Defect Coverage Analysis Presenter: Prof Mohammad Tehranipoor - University of Connecticut
11:45 AM - 12:15 PM
CDIR: Low-Cost Combating Die/IC Recycling Structures Presenter: Prof Mohammad Tehranipoor - University of Connecticut
10:45 AM to 12:15 PM Concurrent Sessions Thursday, December 5, 2013
Counterfeit Material - Concepts and Framework
Session Chair: Dr Brian Cohen - Institute For Defense Analyses
10:45 AM - 11:15 AM
Counterfeit Part Risk Analysis: Moving From Subjective Assessments to Risk Analysis Supported by Empirical Data and Defensible Estimates Presenter: Mr Henry Livingston - BAE Systems
11:15 AM - 11:45 AM
Contract Language Protects Stakeholder Interests Presenter: Mr Charles Andrus - Intuitive Research & Technology Corp
11:45 AM - 12:15 PM
Software & Supply Chain Assurance:Enabling Enterprise Resilience through Security Automation, Software Assurance and Supply Chain Risk Management Presenter: Mr S Jarzombek - US Department of Homeland Security
10:45 AM to 12:15 PM Concurrent Sessions Thursday, December 5, 2013
Training III
10:45 AM - 12:15 PM
Training: GIDEP & Suspect Counterfeit Reporting (Repeated from Monday) Instructor: Mr William Pumford - GIDEP
