SD22 Guidebook (Part 1)

Instructor: Mr Jason Voeltz - NUWC Keyport

DMSMS Research Essentials (Part 1)
Instructor: Ms Hilary Chadwick - NSWC PHD

How DLA Works

Instructor: Mr Timothy Harding - Defense Logistics Agency

Authors: Mr Timothy Harding - Defense Logistics Agency, Ms Marcia Scott - DLA Land & Maritime

GIDEP Training

Instructor: Mr Jason Mokbel - GIDEP

Author: Mr Peter Panaguiton - GIDEP

Counterfeit Electronic Parts Avoidance Practices Compliance Requirements (Part 1)

Instructors:
Mr Robert Bodemuller - Lockheed Martin Co

Mr Henry Livingston - BAE Systems

Introduction to Parts Management (Part 1)

Instructor: Mr David Greinke - Logistics Management Institute

Contracting for DMSMS Management

Instructor: Mr Tracy Daubenspeck - NUWC Keyport

Introduction to Parts Management: DMSMS and Parts Selection (Part 2)

Instructor: Mr Michael Foley - NAVSEA Keyport

Best Practices for DMSMS Records Collection

Instructor: Mr Tracy Daubenspeck - NUWC Keyport

SD-22 Guidebook (Part 2)

DMSMS Research Essentials (Part 2)

How DLA Works (repeat)

Additive Manufacturing

Instructor: Mr Gregory Colvin - Honeywell Inc

Counterfeit Electronic Parts Avoidance Practices Compliance Requirements (Part 2)

Instructor: Dr Michael Azarian - CALCE University of Maryland

Hardware Software Assurance to Enable Cyber Physical System Security (Part 1)

Instructor: Dr Michael Azarian - CALCE University of Maryland

Provisioning and Logistics Data and the Hidden Risks

Instructor: Mr Michael Foley - NAVSEA Keyport

DMSMS Management Plans

Instructors:
Mr Michael Graham - USAF

Mr John McDonough - US Army

GIDEP Training (repeat)

DMSMS Software (SW) Management

Instructor: Ms Brooke Nix - US Army AvMC

Introduction to Parts Management (Part 1 repeat)

Contracting for DMSMS Management (repeat)

Determining the Best DMSMS Resolution Cost Schedule and Technical Risk (CANCELLED)
Awaiting Confirmation

IP Basics
Instructor: Ms Vicki Alums - DAU

Hardware Software Assurance to Enable Cyber Physical System Security (Part 2)

Spares Forecasting

Instructor: Mr Stephen Els - NUWC Keyport

Author: Mr Stephen Els - NUWC Keyport

DMSMS Software (SW) Management (repeat)

Introduction to Parts Management (Part 2 repeat)

Best Practices for DMSMS Records Collection (repeat)

Investigation of build plate heating to mitigate distortion in laser powder bed fusion additive manufacturing

Poster Presenter: Ms Anna Hayes - The University of Arizona

Authors: Ms Anna Hayes - The University of Arizona, Dr Krishna Muralidharan - The University of Arizona, Dr Barrett Potter - The University of Arizona, Mr Nicolas Tan - The University of Arizona, Mr Pieter van Drielen - The University of Arizona

Opening Remarks
Presenter: Ms Robin Brown - Defense Standardization Program Office

DMSMS Management Success and Initiatives Across DOD Panel
Moderator: Mr Gregory Saunders - Defense Standardization Program Office (Invited)
Presenters:
Mr Ulrich Grothues - NSWC Corona

Mr Walter Araya - Air Force Materiel Cmd

Ms Daphne Henry - US Army AMRDEC

Mr Alfonso Rivera-Ortiz - Missile Defense Agency

Mr Eugene Williams - DLA Land & Maritime

Product Support Managers (PSM) Panel
Moderator: Mr William Kobren - Defense Acquisition University (Invited)
Panel Members:
Mr William Hardy - AFLCMC

Ms Gloria Tuck - USMC

Mr Rodger Chapin - USAF

Ms Melinda Marinello - US Army RDECOM

GIDEP Suspect Counterfeit

Presenter: Mr Peter Panaguiton - GIDEP

Counterfeit Risk Management within the Army

Presenter: Mr Stephen Richard - AMCCDC Chemical Biological Ctr

Author: Mr Stephen Richard - US Army DEVCOM CBC

Counterfeit Parts Avoidance & Detection through Industry Standards the DFARS

Presenter: Ms Joy Angelle - Aerocyonics Inc

Authors: Mr Daniel DiMase - Aerocyonics Inc, Mr Donald Wilczewski - Aerocyonics Inc

Weapon System Availability Drivers

Presenter: Mr Ki Ho Kang - KIHOMAC

DLA’s Generalized Emulation of Microcircuits (GEM) Program; a Solution to the Semiconductor Industrial Base Microcircuit Obsolescence Problem

Presenter: Ms Jennifer Willette - SRI International

Establishing Supplier Groups to Fortify the Industrial Base

Presenter: Ms Jacqueline Allman - ANSER

Author: Ms Catherine Ortiz - Defined Business Solutions

Candidate Weapon System Readiness Metrics and Methodologies UNCLASSIFIED

Presenter: Mr Laurence Langan - US Army CCDC

Using DoD’s Financial Management Regulation to Finance DMSMS Resolutions

Presenter: Dr Jay Mandelbaum - Institute For Defense Analyses

Authors: Mr James Dominy - IDA, Ms Christina Patterson - Institute for Defense Analyses

DMSMS and Parts Management Knowledge Sharing Portals

Presenter: Mr David Greinke - Logistics Management Institute

DMSMS Management of Mechanical Systems

Presenter: Mr Norman Ford - NUWC Keyport

Author: Mr Norman Ford - NUWC Keyport

An Informationled Approach to Choosing Suitable DMSMS Solutions

Presenter: Mr Ethan Plotkin - GDCA Inc

Software Obsolescence Management and Resolution

Presenter: Dr Sanathanan Rajagopal - QinetiQ

DMSMS Program Implementation via ATSP4 contract task order

Presenter: Mr Walter Schubert - DMEA

Author: Ms Marjory Pope - Defense Microelectronics Agency

Network Based Dynamical Ranking for DMSMS Case Prioritization

Presenter: Ms Jana Moore - Department of the Navy

Author: Ms Jana Moore - NUWC Keyport

Environment Safety Occ Health Material Obsolescence Risk Management

Presenter: Ms Lori Hales - Booz Allen Hamilton

Electronic Component Parts Management

Presenter: Mr Paul Jarski - John Deere

Author: Mr Paul Jarski - John Deere

MILSTD 3018 Parts Management

Presenter: Mr David Greinke - Logistics Management Institute

Approved Components List ACL Implementation and Management

Presenter: Mr Vernon Densler - SiliconExpert

Predictive Analytics for Non-microelectronics Components Obsolescence

Presenter: Mr Stephen Olevnik - US Army

Optimizing Strategic DMSMS Management as a Function of System Openness

Presenter: Dr Peter Sandborn - University of Maryland

Authors: Mr ShaoPeng Chen - University of Maryland, Mr William Lucyshyn - University of Maryland

Obsolescence Management A Lifecycle Management Systems Analysis Approach

Presenter: Ms Rebecca Moos - NUWC Keyport

Author: Mr Donald Gudden - NUWC Keyport

Industry standards developed to mitigate counterfeit electronic parts

Presenter: Ms Anne Poncheri - Resion - InterCEPT

Supply Chain Risks and Mitigation Approaches for Printed Circuit Board and

Presenter: Ms Kathleen Nargi-Toth - Bowhead Professional Solutions

Domestic Manufacturing of Recycled Sintered NdFeB Magnets for Motors

Presenter: Mr Peter Afiuny - Urban Mining Co

Recent Department of Defense Policies and Actions Relating to Rare Earth Element Supply Chains
Presenters:
Col John Rotante - US Army

Mr Alexander Woods - NSWC IHEODTD

When Choosing New Source of Supply NSOS as your DMSMS Solution

Presenter: Mr William Spain - GDCA Inc

Benefits of Data Science in DMSMS

Presenter: Mr Dennis Summers - NUWC Keyport

Using AM to Increase Combat Readiness and Decrease Supply Chain Backlog

Presenter: Mr Scott Adams - Marine Corps Systems Cmd

Author: Capt Matthew Audette - Marine Corps Systems Cmd

Forming Effective Obsolescence Teams Do You Have the Right Mix of Personas

Presenter: Mr Vernon Densler - SiliconExpert

Benefits of Performing Vendor Surveys
Presenters:
Mrs Ilene McKenzie - NUWC Keyport

Ms Pamela Wood - NUWC Keyport

Filling Sustainment Data Gaps

Presenter: Mr Trevor Goehring - General Atomics

A Data-Driven Approach for Improving Obsolescence Monitoring Methods

Presenter: Ms Victoria Diaz - University of Washington

Evolving the obsolescence enterprise – improving effectiveness through netw

Presenter: Mr Kelly Moore - BAE Systems

Author: Ms Cheryl Bringley - US ARMY TACOM

Using Working Groups to Manage DMSMS Issues
Presenter: Mr Nicholas Schmitter - NSWC Crane

Enabling Rapid Development Through Parts Management Best Practices

Presenter: Mr David Locker - US Army AvMC

Hard to Procure Parts and becoming a Source of Supply for DLA

Presenters:
Mr David Carns - DLA Aviation

Ms Rebecca Castellani - Defense Logistics Agency

Mr Patrick Masterton - Defense Logistics Agency

Just in Time Data

Presenter: Mr Vernon Densler - SiliconExpert

DMSMS Resolution Efficency

Presenter: Mr Andre Diemunsch - NAVSEA Keyport

Optimal Life of Need Buy Policy Algorithms for Strategic DMSMS Management

Presenter: LTC James Starling - University of Washington

Authors: Dr Youngjun Choe - Industrial Systems Engineering UW, Dr Christina Mastrangelo - University of Washington, LTC James Starling - University of Washington

Acquisition Life Cycle DMSMS Guidance

Presenter: Ms Amber Harden - NUWC Keyport

Quantitative Surface Analysis method for eliminating counterfeits

Presenter: Dr Naresh Menon - Covisus Inc

Authors: Mr Edward Burns - Covisus Inc, Dr Jason YamadaHanff - Covisus Inc

Counterfeit mitigation requirements of AS9100D

Presenter: Ms Anne Poncheri - Resion - InterCEPT

Changing Trends in Counterfeit and Nonconforming Reported Parts in the Electronics Supply Chain

Presenter: Mr Richard Smith - ERAI Inc

Making Material Substitution Possible – Lessons Learned from DLA Attempt

Presenter: Mr Benjamin Jilson - LMI

Regional Manufacturing Ecosystem Approach to Material Shortage Challenges

Presenter: Mr Anthony Girifalco - Delaware Valley Industrial Resource Ctr (DVIRC)

Author: Mr Anthony Girifalco - Delaware Valley Industrial Resource Ctr (DVIRC)

Electrical Component Material Termination Finish Risks and Options

Presenter: Mr Ronald Olsen - Raytheon Co

Authors: Mr Brett Anderson - Raytheon Co, Mr Douglas Aylward - Raytheon Co, Mr Michael Eskridge - Raytheon Co

Developing a Risk Methodology for Prioritizing DMSMS Issues

Presenter: Mr Timothy Zitkevitz - Lockheed Martin Co

Innovative Tools to Move Defense Supply Chains Beyond Obsolescence Mgt

Presenter: Mr Craig Herndon - NSWC Crane

Machine LearningBased Supply Reliability Analytics Applications to DMSMS

Presenters:
Dr Walter Yund - GE Research

Mr Peter Koudal - GE

Best Practices for Dealing With High Cost High Quantity End of Life Notice

Presenter: Mr Michael Gadberry - US Navy

Tracking and analysis of AtRisk Materials at Sandia National Laboratories

Presenter: Dr Joseph Cordaro - Sandia National Labs

Authors: Dr Celeste Drewien - Sandia National Labs, Dr Richard Karnesky - Sandia National Labs

Mitigating Obsolescence During Design Development

Presenter: Mr Edward Hendle - General Atomics Aeronautical Systems Inc

Benefits and Challenges of starting DMSMS support during the EMD phase

Presenter: Mr Nicholas Schmitter - NSWC Crane

USAF Depots Case Studies Proven Approaches to Resolve Electronic Obsolescence

Presenter: Mr Charlie Beebout - Global Circuit Innovations Inc

Author: Mr Charlie Beebout - Global Circuit Innovations, Inc

Making Material Substitution Possible Lessons Learned from DLA Attempt

Presenter: Mr Benjamin Jilson - LMI

It All Starts Here Requirements of an EBOM

Presenter: Mr Eric Hughes - NSWC Crane

Applicability of DMSMS lessons learned to Parts Management

Presenter: Mr Allen Bertapelle - Sikorsky

Insight and Trends about Component Procurement and Obsolescence

Presenter: Mr Gregory Wood - IHS Markit

The Need for Leadership and Centralization in the Vendor Survey Process

Presenter: Mrs Ilene McKenzie - NUWC Keyport

Developing Tools for Strategic DMSMS Management

Presenter: Mr Annan Gaggi - General Atomics

Author: Mr Annan Gaggi - General Atomics Aeronautical Systems Inc

WHERE WE WERE TO WHERE WE ARE IN BUILDING A ROBUST DMSMS PROGRAM IAW AFMCI

Presenter: Mr Michael Graham - USAF

Ecommerce – Do You Know Where Your Parts Come From

Presenter: Mr Robert Bodemuller - Lockheed Martin Co

The impact of digital disruption on your semiconductor suppliers

Presenter: Mr Ronnie Cates - Microchip Technology Inc

Author: Mr Ronnie Cates - Microchip Technology Inc

Addressing DMSMS through Contextual Design: Cultural and Geopolitical Influences on the Industrial Base

Presenter: Mr Rasheed Al Kotob - Northrop Grumman Aerospace Systems

Author: Mr Alexander Vaschenko - Northrop Grumman Corp

Industrial Capabilities and Technology Enabling Programs

Presenter: Mr Eric Hoover - RDECOM Chemical Biological Ctr

An Update on SMART The Defense Logistics Agency Strategic Materials Supply

Presenter: Mr Adam Carroll - Oak Ridge National Laboratory

Author: Mr Kevin Jones - Defense Logistics Agency

DMSMS Engineering Resolving Near Term Engineering Puzzles

Presenter: Mr Sandip Bhowmik - General Atomics Aeronautical Systems Inc

Author: Mr Sandip Bhowmik - General Atomics Aeronautical Systems Inc

Mitigating Obsolescence Issues Facing Today’s Warfighter using the REARM (Reverse Engineering Avionics Redesign & Manufacturing) Innovation Suite

Presenter: Mr John Winslett - USAF

Introduction to the International Institute of Obsolescence Management

Presenter: Mr Timothy Zitkevitz - Lockheed Martin Co

Writing Cases That Are Easy to Read and Understand

Presenter: Mr Gene Harper - NAVSEA Keyport

Author: Mr Gene Harper - NAVSEA Keyport

How to use the New Data Item Descriptions (DIDs)

Presenters:
Mr Edward Gingras - NUWC Keyport

Mr Tracy Daubenspeck - NUWC Keyport

Microcircuit obsolescence solutions and strategies in the AME Program

Presenter: Mr Milton Diaz - SRI International

Re-engineering Obsolete FPGAs through Hardware and Software Translation into Current Generation FPGAs

Presenter: Mr Alan Lovell - MacAulayBrown Inc

Author: Mr Patrick Jenkins - Global Circuit Innovations

Why Tech Data Is Integral to Supply Chain Risk Management

Presenter: Mr Kerry McCarthy - LMI

Authors: Mr Benjamin Jilson - LMI, Mr Kerry McCarthy - LMI

Electronic Health Assessment for Predictive Maintenance and Smart Part Management

Presenter: Dr Andrew Portune - Nokomis Inc

What Does the Future Look Like For the DMSMS Industry
Presenter: Mr Vincent Spellane - Lockheed Martin Co

Super Capacitor Technology
Presenter: Mr Ronald Demcko - AVX

The Importance of Indentured Bill of Materials BOMS and Drawings for DMSM

Presenter: Mr Benjamin Murphy - NSWC Crane

Best DMSMS Resolution Cost and Technical Risk

Presenter: Mr Michael Gadberry - US Navy

Finding Alternate Sources

Presenter: Ms Summer Wishon - USAF

Author: Ms Summer Wishon - USAF

Panel - Status, Risks and Potential Go Forward Plans with Alternate Grade Products for Military Application
Moderators: Mr Tracy Daubenspeck - Logistics Management Institute (Invited) and Mr Sultan Lilani - Integra Technologies (Invited)
Panel Members:
Mr Sultan Lilani - Integra Technologies LLC

Mr David Locker - US Army AMRDEC

Dr Allyson Yarbrough - Aerospace Corp

Mr Mark Dapore - L3Harris

Mr Alfonso Rivera-Ortiz - Missile Defense Agency

Panel - Intellectual Property and Data Rights
Moderator: Ms Vicki Allums - Defense Acquisition University (Invited)

Panel Member: Mr Benjamin Jilson - LMI