Atomistic Modeling of Nanoscale Charring Behavior of Phenolic Resin Matrix at ResinCarbon Fiber Interfaces
Presenter: Dr Ivan Gallegos - Michigan Technological University

Multiscale Modeling of Porosity Formation During Carbonization of CarbonCarbon Composites
Presenter: Dr Andrew Gross - University of South Carolina

Author: Mr Yug Desai - University of South Carolina

UnitCell Approach for CC Process and Mechanical Modeling
Presenter: Dr John Podhiny - Materials Research & Design Inc

Development of pyrolysis optimization methodology for carboncarbon materials
Presenter: Mr Paul Christodoulou - ATA Engineering

Alumina Fiber Reinforcements for OxOx CMC's
Presenter: Mr Marc Simpson - 3M

Author: Mr Stan Fast - 3M

Material Qualification Testing of COI Ceramics OxideOxide Ceramic Matrix Composites ASN312 ASN610 and ASN720
Presenter: Mr Matthew Opliger - Wichita State University

Author: Mrs Rachael Andrulonis - WSU NIAR

Industrialization of a prepregbased Oxide – Oxide ceramic matrix composites Program overview and highlights
Presenter: Dr Saravanan Arunachalam - Spirit Aerosystems Inc

Authors: Mr Dylan Kruep - Spirit AeroSystems Inc, Dr Robert Meinders - Spirit Aerosystems Inc, Mr Samuel Pint - Spirit Aerosystems

NDI round robin studies and Influence of different flaw size on mechanical properties
Presenter: Dr Saravanan Arunachalam - Spirit Aerosystems Inc

Author: Dr Robert Meinders - Spirit Aerosystems Inc

Does a Relationship Exist Between Hardness and Compression Strength for Advanced Ceramics
Presenter: Dr Jeffrey Swab - ARL DEVCOM

Ballistic Testing of Armor with Healed Defects
Presenter: Dr Terence Whalen - CoorsTek

Author: Dr Michael Knight - CoorsTek

Dynamic Hardness of Advanced Ceramics
Presenter: Dr Jeffrey Swab - ARL DEVCOM

Cratering and penetration behavior of boron carbide ceramics subjected to highvelocity sphere impact
Presenter: Mr Konrad Muly - Johns Hopkins University

Material Maturation for High Mach Systems – Advancing Technical and Manufacturing Readiness Levels for C/C Composites
Presenter: Dr Alexander Morgan - UDRI

Updates on Design and Testing of an Air-Coupled Ultrasonic Scanning System for C-C Composites
Presenter: Dr Dathan Erdahl - UDRI

Authors: Mr Evan Bundeson - UDRI, Dr Barath Narayanan - UDRI, Mr Robert Olding - UDRI

Physics-Informed Machine Learning for Non-Destructive Evaluation of Carbon-Carbon Composites by Air-Coupled Ultrasound
Presenter: Mr Theodore Cary - UDRI

Influence of Processing on Microstructure Damage State and ThermoMechanical Performance of CC Composites
Presenter: Mr Jayson Lotz - UDRI

CarbonCarbon Hydrocode Material Model Development
Presenter: Mr Daniel Hladio - Materials Research & Design Inc

Modeling the Processing and Densification of Carbon Composites
Presenter: Dr Peter Creveling - National Technology Engineering Solutions Sandia

Author: Dr Peter Creveling - National Technology Engineering Solutions Sandia

A Review of Organic Pyrolysis for Improved Carbon Yield
Presenter: Dr William Carty - Materials Research Furnaces LLC

Author: Mr George Minott - Exothermics Inc

High-Temperature Crosslinking between Graphitic Surfaces and Carbon-Based Resins
Presenter: Prof Jacob Gissinger - Stevens Institute of Technology

Characteristics of SiC coated C-C Composites for Hypersonic Applications
Presenter: Dr Richard Gulotty - Honeywell Aerospace

Authors: Dr Sergey Leonov - University of Notre Dame, Mr Ryan Bourlier - Honeywell International Inc, Dr Mehrad Mehr - Honeywell International Inc, Dr Hillary Mitchell Warden - Honeywell International Inc, Dr Long Gui Tang - Honeywell Inc, Dr Jagjeevan Thind - Honeywell International Inc, Mr Ryan Bencivengo - University of Notre Dame

Castable CMC's
Presenter: Mr Frank Kowalczyk - Physical Sciences Inc

Effect of steam environment on mechanical behavior of Oxide – Oxide Ceramic Matrix Composites
Presenter: Dr Saravanan Arunachalam - Spirit Aerosystems Inc

Author: Mr Dylan Kruep - Spirit AeroSystems Inc

Protocol for repairing OxideOxide Ceramic Matrix Composites Preliminary assessment on joining and repair
Presenter: Dr Saravanan Arunachalam - Spirit Aerosystems Inc

Author: Mr Dylan Kruep - Spirit AeroSystems Inc

Residual stress characterization of residual silicon in MI SiC/SiC composites connecting processing, structure, and performance
Presenter: Dr Mathew Schey - UES Inc

Hypersonic Weather Encounter Damage Predictions in CarbonCarbon Composites
Presenter: Prof Ibrahim Guven - Virginia Commonwealth University

Weather it’s important for Hypersonic Material Survivability
Presenter: Dr Justin Hendrix - SSP

Author: Mr Joel Alvarez - Conventional Prompt Strike Program Office

Review of a 2005 Study Concerning the Development of a Hypervelocity Material Solution for Hypersonic ReEntry Bodies in High Environmental Severity Index Environments
Presenter: Ms Morgan Small - NASA LaRC ASM

Author: Dr David Glass - NASA Langley

Coupled FluidStructure Interaction Modeling of Hypersonic Weather Encounters with Material Failure and Fragmentation
Presenter: Prof Ibrahim Guven - Virginia Commonwealth University

Advanced 3D Diagnostic Capabilities for Hazardous weather impact damage on highspeed vehicles
Presenter: Dr Mateo Gomez Gomez - spectral energies

Authors: Dr Sukesh Roy - Spectral Energies LLC, Mr Brandon Yant - Spectral Energies

Comparison of Microscopic Measures of Void and Crack Morphology in CarbonCarbon Composites via Optical Microscopy and AIsegmented Xray CT
Presenter: Dr Jevan Furmanski - UDRI

Mitigation of Thermomechanical Stress in MetalCarbonCarbon Joints at High Temperature with Fiber Steering and Material Hybridization
Presenter: Dr Jevan Furmanski - UDRI

Benzoxazine Resins and Their CC Composites
Presenter: Dr Chenggang Chen - UDRI

Characterization of pyrolysis shrinkage in 3D-printed phenolic-based composites
Presenter: Ms Niya Grimes - University Of Tennessee MABE

HighEnthalpy Plasma Characterization via Laser Absorption Spectroscopy
Presenter: Dr Zhili Zhang - University of Tennessee Knoxville

Author: Mr Sameul Feltis - University of Tennessee

3D Woven MidDensity Carbon Phenolic 3MDCP Thermal Protection System TPS Advancement Update
Presenter: Dr Peter Marshall - NASA Ames Research Ctr

Arcjet Testing of FullScale Formed 3MDCP for Extreme Envrionments
Presenter: Mr Jonathan Morgan - NASA

Author: Dr Magnus Haw - NASA

3MDCP Ongoing Thermomechanical Characterization for Mars Sample Return Earth Entry Vehicle
Presenter: Mr Micah Armstrong - Kratos SRE

Author: Mr Bhavesh Patel - Kratos SRE

Multiscale Modeling of Woven Ablative Thermal Protection System Materials
Presenter: Dr Justin Haskins - NASA Ames Research Ctr

Processing Properties and design with 3D printed CCSiC
Presenter: Mr Ryan Dunn - Mantis Composites

Densification of Binder Jet Additive Manufactured Ceramics using Preceramic Polymers
Presenter: Dr Nicholas Ku - DEVCOM Army Research Lab

Development of aluminum nitride additive manufacturing for inspace propulsion and ceramic heat pipe thermal management
Presenter: Dr John Howard - Canopy Aerospace

Using AM to Develop New Structural Insulators
Presenter: Mr Collin McClain - JHUAPL

Comparison of Finite Element Models and Empirical Data of CarbonCarbon Asymmetric FourPoint Bend Specimens
Presenter: Mrs Maria Wagner - Iowa State University

Authors: Mr Nicholas DiGregorio - NASA LaRC, Ms Emilee Evans - NASA LaRC, Dr David Glass - NASA Langley, Mr Bryan Kubitschek - NASA LaRC, Mr Austin Smith - NASA LaRC, Dr Nelson Vieira De Carvalho - NASA LaRC

Extending Empirical Thermal Conductivity Measurements of CarbonCarbon to the PlyLevel with Porous Microstructure Analysis PuMA
Presenter: Ms Morgan Small - NASA LaRC ASM

Authors: Dr David Glass - NASA Langley, Mr Bryan Kubitschek - NASA LaRC, Mrs Maria Wagner - Iowa State University, Mr Austin Smith - NASA LaRC

Multiscale Effective Mechanical Property Prediction of As-Built Composites via Uncertainty-Aware Analysis of X-ray Computed Tomography
Presenter: Dr Reed Kopp - ATA Engineering Inc

Interlaminar Fracture Toughness of 2DWoven CarbonCarbon Laminates at Elevated Temperatures
Presenter: Mr Austin Smith - NASA LaRC

Authors: Mr Jacques Cuneo - Kratos SRE, Dr David Glass - NASA Langley

Rapid CCSiC Composite Densification by Reactive Melt Infiltration for Thermal Protection Materials
Presenter: Dr Daniel Lowry - Sandia National Labs

Authors: Mr Thomas Diebold - Sandia National Labs, Dr Bernadette HernandezSanchez - Sandia National Labs, Dr Samuel Swan - Sandia National Labs, Dr NIchole Valdez - Sandia National Labs, Dr Isaac Wilson - Sandia National Labs, Dr Zachary Wilson - Sandia National Labs

Functional Grading of CC to CSiC CMC’s with Polycarbosilanes
Presenter: Dr Steven Bullock - Oak Ridge National Lab

Author: Dr Steven Cramer - Oak Ridge National Lab

Tailoring 3D C/C-SiC composites, from machined components to hypersonic aeroshells
Presenter: Dr James Stahl - Fiber Materials Inc, Spirit AeroSystems Co

LHMEL Evaluations of Alternate Aeroshell Materials
Presenter: Ms Kayla Stark - ReLogic Research Inc

Authors: Mr Jeff DeMange - ReLogic Research Inc, Mr Michael Johnson - ReLogic Research, Mr Cameron Lindberg - ReLogic Research Inc, Mrs Sydney Rembert - ReLogic Research Inc, Mr Jacob Shults - ReLogic Research Inc

Cost Effective TPS Technology for Hypersonic Applications
Presenter: Mr Grant Glass - RTCS LLC

Author: Dr Gerald Russell - RTCS LLC

A FullyCoupled Multiphysics Framework for AblatingCharring Materials
Presenter: Dr Eric Blades - ATA Engineering

Update on PICAD Thermomechanical Characterization up to 4400 °F for MSR SRL and Dragonfly Missions
Presenter: Mr Kelly McCullers - Kratos SRE

Author: Mr Bhavesh Patel - Kratos SRE

Update on Conformal Phenolic Impregnated Carbon Ablator CPICA Thermomechanical Characterization
Presenter: Ms Courtney Commerford - Kratos SRE

Author: Mr Bhavesh Patel - Kratos SRE

Improved Phenolic Resin Formulations for Greater Compliance in Conformal PICA
Presenter: Ms Tane Boghozian - Analytical Mechanics Associates

Regolith Ceramics for InSitu Additive Manufacturing in Space
Presenter: Mr Alex Hamberg - Florida State University HPMI

Quantifying Changes in Particle Density in Ceramic Resins
Presenter: Ms Pandora Picariello - Colorado School of Mines

Authors: Dr Geoff Brennecka - Colorado School of Mines, Dr Callie Higgins - National Institute of St&ards & Technology

Coating Additively Manufactured Steels for Corrosion Protection
Presenter: Dr Pauline Smith - DEVCOM US Army Research Lab

Authors: Mr Alexander Butler - DEVCOM US Army Research Lab, Mr John Kelley - DEVCOM ARL, Mr Daniel Pope - DEVCOM ARL

Effect of Bondline Thickness on Interfacial Fracture Toughness in AssemblyBonded CarbonCarbon Composites
Presenter: Mr Austin Smith - NASA LaRC

Authors: Dr David Glass - NASA Langley, Mr Nicholas Parolini - Baylor University

Effects of Layup and Test Direction on the Interlaminar Shear Strength of CarbonCarbon Composites Measured using Asymmetric FourPoint Bend
Presenter: Dr Wallace Vaughn - NASA LaRC

Assessment of 2D CC ILT Data through FEA
Presenter: Dr John Podhiny - Materials Research & Design Inc

Uncertainty Quantification of Mechanical Damage in Carbon Composites
Presenter: Mr Sean Skweres - Purdue University

Authors: Dr Peter Creveling - National Technology Engineering Solutions Sandia, Dr Scott Roberts - Sandia National Labs, Dr Michael Sangid - Purdue University, Dr Drew Sommer - Sandia National Labs

Delivering Affordable Thermal Protection System Capacity Now
Presenter: Mr Mark Forkapa - Fiber Materials Inc

Thermomechanical Screening of Advanced CSiC Composites
Presenter: Mr Zack Tew - Kratos SRE

Authors: Mr Terry Barnett - Kratos SRE, Mr Jason Wood - Kratos SRE

Effects of FAST Temperature on NITECSiC Ceramic Matrix Composites
Presenter: Mr Stuart Kusdono - University of Southern California

Processing Evaluation Characterization of Commercial NITE CSiC Prepreg with PyC Interface Coating
Presenter: Mr Wylie Simpson - Axiom Materials Inc

Authors: Mr Fernando Sarmiento - Axiom Materials Inc, Mr Antonios Tontisakis - Axiom Materials

Optimizing Processing Parameters for Enhanced Homogeneity in SiCZrB2Cf Composites Using FAST Processing
Presenter: Mr Kevin Nguyen - University of Southern California

Performance Enhancement of Carbon Fibers to 2000C
Presenter: Mr Joel Davis - Advanced Ceramic Fibers LLC

ReEntry Qualifying New Extreme Environment Sensors Integrated into Ablative TPS
Presenter: Dr John Howard - Canopy Aerospace

Ablation Resistance and InSitu Passivation in Boron Nitride Nanotube Hybrid Composites under Supersonic Conditions
Presenter: Ms Aspen Reyes - FAMUFSU College of Engineering

Author: Dr Rebekah Sweat - High-Performance Materials Institute

Material recession due to aerothermodynamic interactions in the nearboundary layer informed from atomic kinetic reactions
Presenter: Dr Robert Slapikas - SURVICE Engineering

Authors: Dr Luis Bravo - US Army Research Lab, Dr Anindya Ghoshal - US DEVCOM Army Research Lab, Mr Nick Plewacki - SURVICE Engineering

Overcoming the Challenges for Validating Metal AM Components with CT
Presenter: Mr Tyler Ripperger - Waygate Technologies

Integration of OpenSource Tools for Material Characterization of Metallic Additively Manufactured Parts
Presenter: Dr Jarred Heigel - ATA Engineering

Accelerating Materials Development via ICME Automation An Additive Manufacturing Case Study
Presenter: Dr David Hicks - ALMMII LIFT

Authors: Dr Anthony Koumpias - LIFT, Mr Reese Eichhorn - LIFT

New Computer Aided Design CAD Tool for Automating Direct-Writing of Advanced Functionally-Graded Materials
Presenter: Mr Christopher Stricklan - Kraetonics LLC

Authors: Dr Gilbert Carranza - Kraetonics, Mr Christopher Curtis - Kraetonics, Dr Raymond Rumpf - Kraetonics

Improvements on BODADerived Resin BDR Processing for CarbonCarbon
Presenter: Dr Ernesto Borrego - Hand Technologies LLC

CC Composites with Huntsman ARALDITE ® HS 50001
Presenter: Dr Kevin Wacker - Huntsman Corp

Authors: Mr Derek Kincaid - Huntsman Corp, Mr Christopher Lam - Huntsman, Mr Dong Le - Huntsman Corp

Effect of Group 5-10 Transition Metallocenes on the Pyrolytic Conversion of Benzoxazine Thermoset Resin
Presenter: Dr Faheem Muhammed - DEVCOM Army Research Lab

Authors: Dr Daniel Knorr - US Army DEVCOM ARL, Dr Ngon Tran - US Army DEVCOM ARL

Evaluation of Pitch Materials for Carbon-Carbon Composites
Presenter: Dr Ngon Tran - US Army DEVCOM ARL

Authors: Dr Daniel Knorr - US Army DEVCOM ARL, Dr Faheem Muhammed - US Army DEVCOM ARL

Development of Processable Polymer Derived UltraHigh Temperature Ceramics and Composites
Presenter: Dr Abigail Advincula - UES A BlueHalo Co

Biological Building Blocks for UltraHigh Temperature Ceramic Precursors
Presenter: Ms Sophia Heckler - UES A Blue Halo Co

Authors: Dr Jared Delcamp - USAF AFRL, Dr Matthew Dickerson - USAF AFRL, Dr Benjamin Harvey - NAWC Weapons Division, Mr William Meador - UES A Blue Halo Co, Dr Timothy Pruyn - USAF AFRL

Fabrication Testing and Optimization of ZrC and HECCf based UHTCMCs
Presenter: Mr Nathaniel Blatt - Missouri University of Science & Technology

Authors: Dr Gregory Hilmas - Missouri University of Science & Technology, Dr Jason Lonergan - Missouri University of Science & Technology, Dr Jeremy Watts - Missouri University of Science & Technology

Novel Sintering Aid Additions to ZrB2Cf UHTCMCs and Mechanical Characterization of Thermally Treated Cf
Presenter: Mr Aaron Ginsparg - Missouri ST

Testing of Intumescent Ablators
Presenter: Mr Derrick Talley - Kratos SRE

Effects of resin type fillers and fiber architecture on ablative performance of polymer matrix composites
Presenter: Dr Nekoda van de Werken - Sandia National Labs

Guiding the Design of Petroleum Pitches with Pyrene Model Pitch Systems
Presenter: Prof Mark Thies - Clemson University

Authors: Mr Jefferson Giles - Clemson University, Mr Jack Schmidt - Clemson University

Effect of HighTemperature Treatments on the Structural Evolution of Mesophase Pitch Materials
Presenter: Mr John Schumacher - Florida State University

Pitch Characterization and Formulation for Low Cost High Char Yield Resin System
Presenter: Ms Elizabeth Andrew - Materials Sciences LLC

Modelingdriven design of mesophase pitchbased carboncarbon composite
Presenter: Mr Joshua Kemppainen - Michigan Technological University

Authors: Mr Lawrence Osentoski - Ingenium Scientific Inc, Dr Gregory Odegard - Michigan Technological University

Computed Tomography and Gun Launch of CarbonCarbon Nosecones
Presenter: Dr Jennifer Sietins - US Army DEVCOM

Fabrication of Carbon Fiber Composites Incorporating ZrB2 Synthesized from BoroCarbothermal Reduction
Presenter: Mr Jacob Stacy - Missouri University of Science & Technology

Authors: Dr Gregory Hilmas - Missouri University of Science & Technology, Dr Jason Lonergan - Missouri University of Science & Technology, Dr Jeremy Watts - Missouri University of Science & Technology

Fabrication of CMC Components for Hot Fire Testing
Presenter: Mr Robert Griesenauer - PSI

Author: Mr Robert Griesenauer - PSI

Fiber-reinforced ceramic coatings on a refractory metal substrate
Presenter: Mr Joshua Craggette - UES a BlueHalo Co

High Temperature Environmental Barrier Coatings for 2700F Applications
Presenter: Dr Julin Wan - GE Aerospace Research Ctr

Authors: Dr Nickolas Antolino - GE Aerospace Research Ctr, Dr Bryan Harder - NASA GRC, Dr Reza Sarrafinour - GE Aerospace Research Ctr, Dr Anant Setlur - GE Aerospace Research Ctr, Dr Suresh Viswanathan - GE Aerospace, Dr Andrea Vozar - GE Aerospace Research Ctr

Furnace Oxidation of High Temperature Environmental Barrier Coatings
Presenter: Dr Nicholas Antolino - GE Aerospace

HotHydrogen Performance of a Corrosion Barrier For a Space Nuclear Thermal Propulsion Reactor
Presenter: Mr Andrew Giles - General Atomics

Authors: Mr William Campbell - General Atomics, Dr Christian Deck - General Atomics, Dr Hesham Khalifa - General Atomics, Mr Gerald Lilienthal - General Atomics, Dr Jonas Opperman - General Atomics, Ms Nicole Pacheco - General Atomics, Ms Simrun Saini - General Atomics

Carbide Coated CarbonCarbon Heat Exchange Tubes for Nuclear Thermal Propulsion Fuel Element
Presenter: Dr Julia Cline - NASA LaRC

Status of NTP CT3 Project and Utilization of High Thermal Gradient Test Capabilities for NTP Applications
Presenter: Mr Rafael Gonzalez - Kratos SRE

Recent tudies on carbides for nuclear thermal propulsion
Presenter: Mr Benjamin Kowalski - NASA GRC

Fabrication and Mechanical Testing of Heat Exchanger Tubes for Nuclear Propulsion and Other Applications from Continuous Carbon Nanotube Yarns and Tapes
Presenter: Dr Godfrey Sauti - NASA

Authors: Mr David Gailus - Nanocomp Technologies, Dr JaeWoo Kim - Analytical Mechanics Associates, Dr Emilie Siochi - NASA LaRC, Dr Russell Wincheski - NASA LaRC

Fabrication of Thin Wall Structures by Embedded Wire CVD
Presenter: Dr Seth Shuster - Free Form Fibers

Authors: Dr Joseph Pegna - Free Form Fibers, Dr Kirk Williams - Free Form Fibers

Manufacturing of UltraHighVolume Fraction Interwoven Carbon Nanotube Aerogel and Yarn Laminates
Presenter: Mr Luke Messer - High-Performance Materials Institute HPMI

Authors: Mr Cecil Evers - Florida State University HPMI, Dr Richard Liang - Florida State University, Dr Jin Gyu Park - Florida State University

Modernizing thermal protection manufacturing with roboticallyapplied coatings
Presenter: Mr Charlie Fuller - Canopy Aerospace

Accelerated Pyrolysis of PolymerDerived CC and CMCs
Presenter: Mr Gary Tiscia - Materials Research And Design Inc

Manufacturing and Testing of Needled Preforms for CarbonCarbon Composites
Presenter: Dr Charles Cook - Oak Ridge National Lab

Authors: Dr Craig Blue - Oak Ridge National Lab, Dr James Klett - Oak Ridge National Labratory, Dr Vlastimil Kunc - Oak Ridge National Lab, Mr Daniel Rasmussen - Oak Ridge National Labratory

Preliminary Study of CNT Yarnbased CNTC Composites
Presenter: Mr John Schumacher - Florida State University

Author: Dr Jin Gyu Park - Florida State University

Advanced 3D Carbon/Carbon Nosetip Concepts & Developments
Presenter: Mr Michael Favaloro - Textron Systems Corp

Authors: Mr Jim Crowley - Textron Systems Corp, Mr Michael Favaloro - Textron Systems Corp, Mr Mitchell Uretsky - Textron Systems Corp

MultiService Advanced Capability Hypersonic Test Bed MACH TB
Presenter: Mr Kegan Miller - NSWC Crane MACH TB

The Case for Accelerating the Use of Hot Structures on Hypersonic Vehicles
Presenter: Mr Bryan Kubitschek - NASA LaRC

Optimizing Defense Innovation: Strategic Navigation of Department of Defense (DoD) Investment for Swift Technological Advancement
Presenter: Mr J Petrie - OSDAS ICAM Office

An Approach to Hypersonic Material Transition Through the Future Solutions Working Group FSWG
Presenter: Dr Justin Hendrix - SSP

MeltInfiltrated CCSiC for Thermal Protection Systems and Launch Vehicle Applications
Presenter: Mr Gary Tiscia - Materials Research And Design Inc

Ablation Properties of HfCSiCWC and HfCSiCTaC UHTCs Produced by Pressureless Sintering
Presenter: Mr Caden Doolittle - University of North Texas

3000F capable sprayon TBC coating architecture for CMCs
Presenter: Mr Jason Kikkawa - Applied Thin Films Inc

Authors: Mr Jonah Freese - Applied Thin Films Inc, Mr Logan Johnson - Applied Thin Films Inc, Dr Sankar Sambasivan - Applied Thin Films Inc

DEVELOPMENT OF A HIGH-EMISSIVITY COPPER OXIDE COATING FOR HYPERSONIC CONDITIONS
Presenter: Mr Panagiotis Panoutsopoulos - Kratos SRE

Overview of the Composites for Hypersonics by IcME CHIME Program
Presenter: Mr Shane Flores - ATA Engineering Inc

Authors: Mr Michael Abbott - FMI a Spirit AeroSystems Co, Mr Richard Hale - FMI a Spirit AeroSystems Co, Dr David Mollenhauer - USAF AFRL/RXNP, Mr Patrick Sullivan - Fiber Materials Inc Spirit Aerosystems

JAHVAA Material Testing – Plans and Progress
Presenter: Mr William Ralph - Kratos SRE

Author: Mr Nathan McGillivray - Kratos SRE

Notional Aerothermal Conditions Overview for the JAHVAA Program
Presenter: Mr William Ralph - Kratos SRE

Authors: Mr Daniel Hladio - Materials Research & Design Inc, Mr Nathan McGillivray - Kratos SRE

Advancing MRL of new technologies for composite and high temperature textiles
Presenter: Dr Michael Rein - Advanced Functional Fabrics of America

Author: Ms Melissa Wye - AFFOA

Improvements in Ultrasonic Machining of Advanced Ceramics and Composites
Presenter: Mr Michael Cahill - OptiPro Systems

Testing Advanced Thermal Protection Systems with Flight Proven ErinyesTM Hypersonic Test Bed
Presenter: Mr Adam Naramore - Kratos Space Missile Defense Systems Inc

Authors: Mr Jared Clark - Kratos Space Missile Defense Systems Inc, Mr Hosein Ghadimi - Kratos Space Missile Defense Systems Inc

Advanced Materials Performance Enabling Data AMPED Toolbox
Presenter: Mr Caleb Saathoff - WSU NIAR

Author: Mrs Rachael Andrulonis - WSU NIAR

Reaction Engineeringbased SiC Matrix Composites for Hypersonic Flight Increased Reliability
Presenter: Dr Witold Kowbel - Advanced Composites & Coatings LLC

Prepreg Tape Braiding for the Rapid Manufacture of Affordable CMC Structures
Presenter: Mr Thomas Fusco - PSI

SiC ZrB2Cf UHTCMCs Manufactured using High Pressure Polymer Infiltration and Pyrolysis
Presenter: Mr Matik Heskin - Missouri University of Science & Technology

Evaluation of Protective Coatings for Hypersonic Components
Presenter: Mr Victor Sponer - Plasma Processes

Authors: Dr Tyler Kaub - Plasma Processes LLC, Mr Timothy McKechnie - Plasma Processes LLC

Oxide Microstructure and Oxidation Kinetics of Transition Metal Carbides in High Temperature Atomic Oxygen
Presenter: Mr Connor Stephens - University of Virginia

OXIDATION KINETICS OF MELT-INFILTRATION-BASED ZrSiZrCSiC COATINGS ON CARBON-CARBON
Presenter: Dr Mark Opeka - Kratos SRE

Experimental investigation of the oxidation growth and kinetics of high-entropy carbides under high heat flux
Presenter: Mr Michael Ammendola - DEVCOM Army Research Lab


Authors: Dr Anindya Ghoshal - US DEVCOM Army Research Lab, Mr Robert Koennecker - The Pennsylvania State University, Dr Robert Slapikas - SURVICE Engineering Co, Mr Lucas Wilson - The Pennsylvania State University, Dr Douglas Wolfe - The Pennsylvania State University

Assessment of Foreign Research on Refractory Niobium Alloys for Aerospace Applications
Presenter: Mr Joseph Jankowski - ATI

Authors: Ms Carolina Frey - ATI, Mr Noah Philips - ATI

DeepLearning Software for Composite Material Modeling Analysis
Presenter: Mr Steven Nigro - Materials Research & Design Inc

Authors: Mr Craig Iwano - Materials Research & Design Inc, Mr Ryan Nace - Materials Research & Design Inc

Advanced Manufacturing of PIPBased Silicon Carbide SiC Composites
Presenter: Dr William Wright - Oak Ridge National Lab

Authors: Dr Steven Bullock - Oak Ridge National Lab, Dr Corson Cramer - Oak Ridge National Lab

Fused Filament Fabrication of Discontinuous Fiber Ceramic Matrix Composite Preforms Via Thermo-Oxidative Stabilization
Presenter: Mr Kolby Bull - University of Tennessee Knoxville

Authors: Dr Dustin Gilmer - University of Tennessee Space Institute, Dr Uday Vaidya - University of Tennessee Knoxville

UHT Metal Carbide Carbon Fibers by Direct Conversion Process™
Presenter: Dr John Garnier - Advanced Ceramic Fibers LLC

Advancing Ceramic Reusable Thermal Protection Systems at NASA Johnson Space Center
Presenter: Dr Nathaniel Olson - NASA JSC

Designing Insulative Reusable Thermal Protection Materials – from Shuttle Tile to Next Generation Systems
Presenter: Dr Peter Marshall - NASA Ames Research Ctr

Modernization of Insulative Reusable Thermal Protection Systems
Presenter: Dr Adam Caldwell - NASA Ames

Physical Properties of Reusable Thermal Protection Systems
Presenter: Dr Ashley Ferguson - TexTech Industries Inc

Mitigation of Eutectic Melting in Thermomechanical Evaluations of Refractory Metals and Alloys
Presenter: Mr Ryan Williams - Kratos SRE

Booster Landscape Assessment Strategy and Tactics BLAST Study
Presenter: Dr Kyle Rosenkoetter - MACH20

Authors: Mr Joseph Blackman - MACH20, Mr John Hile - MACH20, Dr Jesse Margiotta - MACH20, Mr Paul Petkevicius - USAF AFRL, Dr Ian Wolford - USAF AFRL

High Temperature Ceramic Syntactic Foams for Structural Insulation
Presenter: Dr Rachel Guarriello - Physical Sciences Inc

Composite Flow Path Technology for Uncooled Scramjet Engines aka Speed with Innovative Flowpath Technology SWIFT
Presenter: Dr Craig Przybyla - USAF AFRL

Author: Lt Collin Santos - USAF AFRL

Insitu Mechanical Strength Testing of Composite Materials Subjected to a Simulated Hypersonic Environment in a Laboratory Testbed
Presenter: Dr David Oakes - Physical Sciences Inc

Authors: Dr Joshua Abney - Physical Sciences Inc, Dr Wilson Rawlins - Physical Sciences Inc, Mr Jeffrey Schindler - Physical Sciences Inc

Advances in Simulation and Testing of Ceramic Matrix Composites for HighTemperature and HighVelocity Applications
Presenter: Dr Anthony Koumpias - ALMMII LIFT

Multiscale multiphysics modeling and experiments of sand erosion on CMCs
Presenter: Mr David Newsome - CFD Research Corp

Modeling Recession of MeB2SiC Ceramics during Oxidation
Presenter: Dr Pavel Mogilevsky - USAF AFRL


Author: Dr Michael Cinibulk - USAF AFRL

Process Development and Testing for Lunar Habitats
Presenter: Ms Chelsea Pickett - NASA

Mechanical Performance of Quasi-Woven Polymer Matrix and C/C Composites
Presenter: Dr Derek King - Weber State University/MARS

Author: Dr Benjamin Garcia - Weber State University

Asymmetric 4Point Bend Testing of 25D CC
Presenter: Mr Ryan Nace - Materials Research & Design Inc

ThermoStructural Analysis of CMC Aeroshell Materials for Hypersonics
Presenter: Mr Kevin Triplett - ReLogic Research

Permeability Characterization of HighTemperature Seals Exposed to Elevated Temperatures and in Multiple Installation Configurations
Presenter: Mr Joshua Finkbeiner - NASA GRC

Author: Ms Hannah Liggett - University of Akron

Evaluation of High-Temperature Fabrics for Improved Performance of Seals and Thermal Barriers
Presenter: Dr Scott Lattime - The University of Akron

Continuation of QuadXE 3D CMC Composite Fasteners for Extreme Environments
Presenter: Mr Michael Crump - Advanced Ceramic Fibers LLC

TBD Temperature Dependent Thermal Resistance Across Ceramic Metal Diffusion Bonds
Presenter: Ms Sarah McQuaid - Texas A&M University

Author: Dr Patrick Shamberger - Texas AM University

Additively-Manufactured Insulated Propulsion Components (AMIPC) Technology
Presenter: Mr Terry Hendricks - ExoAtmospheric Technologies LLC

US Navy Scramjet Combustor Materials Development and Arc-Heater Testing 1983-1986
Presenter: Dr Mark Opeka - Kratos SRE

Design and Validation of a Spectral Hemispherical Emittance Apparatus for Radiative Property Evaluations
Presenter: Mr James Hawbaker - Kratos SRE

Space Environmental Effects on Composite Radiation Shielding Materials
Presenter: Mr John O'Dell - Plasma Processes

Modeling porosity effect on oxidation kinetics of mulliteSi composites
Presenter: Dr Julin Wan - GE Aerospace Research Ctr

Authors: Dr Reza Sarrafinour - GE Aerospace Research Ctr, Dr Anant Setlur - GE Aerospace Research Ctr

Sensitivity of NDE for CMCs
Presenter: Dr Alexander Charles Douglass - USAF AFRL

Contactless measurement technique to determine the thermal conductivity and spectral emissivity of UHTCs at ultrahigh temperatures 2500 °C
Presenter: Mr Hunter Schonfeld - University of Virginia

New Hypersonic Convective Heating Facilities
Presenter: Dr Aaron Dufrene - CUBRC

Material Screening Using Plasma Arc Jet Testing
Presenter: Dr Tyler Kaub - Plasma Processes LLC

Authors: Mr Timothy McKechnie - Plasma Processes LLC, Mr Victor Sponer - Plasma Processes

Burner rig testing of 3D woven CSiC Ceramic Matrix Composites under numerous flexure conditions
Presenter: Prof Gregory Morscher - The University of Akron

Authors: Mr Blake Bowser - University of Akron, Dr Sergio Dos Santos e Lucato - Teledyne Scientific Imaging LLC

HIGH-RESOLUTION 3D SURFACE RECONSTRUCTION OF FLIGHT-TESTED HARDWARE USING SCANNING ELECTRON MICROSCOPY
Presenter: Mr Panagiotis Panoutsopoulos - Kratos SRE

The Optomechanical Properties of Calcium Lanthanum Sulfide
Presenter: Mr Andrew Howe - The University of Central Florida

Authors: Dr Parag Banerjee - The University of Central Florida, Mr Eric Bissell - The University of Central Florida, Ms Barbara Cook - The University of Central Florida, Mr Andrew Cooper - The University of Central Florida, Dr Romain Gaume - The University of Central Florida, Dr Jeffrey Geldmeier - Lockheed Martin MFC, Mrs Kathleen Richardson - The University of Central Florida, Dr Clara RiveroBaleine - Lockheed Martin MFC

Structure and Optical Properties of Ge2Sb2Te5 Deposited on Gold
Presenter: Dr Aubrey Fry - DEVCOM Army Research Lab

Authors: Dr Aubrey Fry - US Army DEVCOM ARL, Dr Mathew Ivill - US Army DEVCOM ARL, Dr J Derek Demaree - US Army DEVCOM ARL, Dr Thomas Parker - US Army DEVCOM ARL, Dr Matthew Bratcher - DEVCOM Army Research Lab

Investigating the Effect of a Glass Transition during Elevated Temperature Fracture Toughness Testing
Presenter: Mr Marc Doran - UDRI

Characterization of Liquid UltraHigh Temperature Ceramic Precursors Derived from Biological Building Blocks
Presenter: Dr William Meador - UES A BlueHalo Co

Authors: Dr Jared Delcamp - USAF AFRL, Dr Matthew Dickerson - USAF AFRL, Ms Sophia Heckler - UES A Blue Halo Co, Dr Nicholas Posey - USAF AFRL, Dr Timothy Pruyn - USAF AFRL, Dr Jordan Zackasee - UES a Bluehalo Co

CarbonCarbon Material Property Identification for a Continuum Damage Model
Presenter: Ms Allison Ruwe - UDRI

Experimental Investigation of ModeI Translaminar Fracture in SiCSiC TapeLaminate Composites
Presenter: Dr Scott Zavada - NASA LaRC

Experimental Characterization of a CarbonCarbon System for Damage Model Input
Presenter: Mr Theron Jackson - UDRI

Authors: Dr Robert Brockman - University of Dayton, Mr Alexander Douglas - Air Force Material Cmd RXNW, Dr George Jefferson - Air Force Material Cmd RXNC, Mr Tyler Lesthaeghe - UDRI, Ms Jennifer Pierce - UDRI, Dr Craig Przybyla - USAF AFRL, Ms Allison Ruwe - UDRI, Mr Norman Schehl - University of Dayton Research Inst

Failure Prediction Methodology for Melt Infiltrated SiCSiC Composite Laminates under Bearing Loads
Presenter: Mrs Rachael Andrulonis - WSU NIAR

Authors: Mr Matthew Blenis - WSU NIAR, Mr Caleb Saathoff - WSU NIAR

Melt Infiltrated SiC/SiC Hot Structure Characterization for Reusable Hypersonic Vehicles Program Introduction
Presenter: Mr Joseph Gessler - Spirit AeroSystems Inc

Numerical and Experimental Characterization of StrainCompliant SiCSiC Composite Hypersonic Vehicle Hot Structure
Presenter: Dr Brett Hauber - UDRI

Hybrid MICVI CMC Architecture Development
Presenter: Dr Adam Bratten - GE Aerospace


Authors: Dr Suresh Viswanathan - GE Aerospace, Dr Jared Weaver - GE Aerospace

SiCSiC Ceramic Matrix Composite CMC Qualification and Related Framework for Aircraft Design and Certification
Presenter: Mr Matthew Opliger - Wichita State University

CVI SiCSiC Material Properties above 3000°F
Presenter: Mr William Retersdorf - Kratos SRE

Author: Mr Jacques Cuneo - Kratos SRE

Effect of molecular structure on cyclosiloxane networks
Presenter: Miss Virginia Mullins - University of Southern Mississippi

U Design Optimization of Cemented Ceramics
Presenter: Dr Matthew Guziewski - DEVCOM Army Research Lab

Thermal Shock Tolerant Tantalum Carbide Forming MAX Phase Materials
Presenter: Mr Craig Iwano - Materials Research & Design Inc

Interlaminar Behavior of Bonded CarbonCarbon at Room and Elevated Temperature
Presenter: Ms Jennifer Pierce - UDRI

Utilizing Peridynamics to Predict Bulk CMC Properties from Input Constituent Material Properties
Presenter: Mr Alexander Tucker - CFD Research

The Effects of Temperature and Layup on Open Hole Tensile Properties of MI SiCSiC
Presenter: Dr Allison Horner - Scalar Scientific LLC

Authors: Dr Barry Davidson - NASA LaRC, Dr David Glass - NASA Langley

Air-Coupled Ultrasonic Nondestructive Evaluation of Carbon-Carbon Materials During Production
Presenter: Mr Jared Taylor - Texas Research Institute Austin

Author: Mr David Forsyth - TRI Austin

AirCoupled Ultrasound Modeling and Experiments Using Carbon Fiber PLA as a Surrogate for CMCs
Presenter: Dr Maureen Morton - UDRI

Authors: Dr John Aldrin - Computational Tools, Mr David Zainey - UDRI, Mr Tyler Lesthaeghe - UDRI, Mr Michael Uchic - USAF AFRL/MLLM

Survivable Dielectric Windows for RF Antennas
Presenter: Dr Samuel Swan - Sandia National Labs

Authors: Dr Jonathan Back - Sandia National Labs, Dr Bernadette HernandezSanchez - Sandia National Labs, Dr Daniel Lowry - Sandia National Labs, Dr James Nance - Sandia National Labs, Dr Isaac Nelson - Sanida National Labs, Dr Zachary Wilson - Sandia National Labs, Dr Matthew Young - Sandia National Labs

Novel Generative AI Model Architecture for Targeted IR Window Materials Discovery
Presenter: Dr Victor Leon - The Johns Hopkins University Applied Physics Lab

Author: Mr Keith Caruso - Johns Hopkins University Applied Physics Lab

High Density Silicon Nitride Fibers Manufactured by LaserDriven Chemical Vapor Deposition for RF Window Applications
Presenter: Dr Shay Harrison - Free Form Fibers

Tech Update on Cerablak® N720 3D OxOx CMCs
Presenter: Mr Logan Johnson - Applied Thin Films Inc

Experimental Assessment of Melt Infiltrated SiCSiC Bolted Joint Failure Prediction Methodologies
Presenter: Dr Scott Zavada - NASA LaRC

Melt Infiltrated SiCSiC Data Compilation as a Pathfinder to Distributed Allowables Methodology for HighTemperature Reusable Applications
Presenter: Mr Matthew Blenis - WSU NIAR

Nanoscale Mechanical Property Determination in OxideOxide Ceramic Matrix Composites using Atomic Force Microscopy
Presenter: Ms Hannah James - Baylor University

Continuous Polycrystalline Silicon Nitride Fibers via Powder Processing Route
Presenter: Dr Hyunjun Kim - BlueHalo

Authors: Dr Michael Cinibulk - USAF AFRL, Mr Randall Corns - BlueHalo, Dr Randall Hay - USAF AFRL, Mr Samuel Opeka - BlueHalo, Dr Lisa Rueschhoff - USAF AFRL, Ms Kathryn Rutherford - BlueHalo, Mr Connor Wyckoff - BlueHalo

HighTemperature Dielectric Characterization Compositional Tailoring of OxideOxide Ceramic Matrix Composites
Presenter: Mr Wylie Simpson - Axiom Materials Inc

Authors: Mr Marc Simpson - 3M, Mr Antonios Tontisakis - Axiom Materials, Dr Chengying Xu - North Carolina State University

Residual Stress Mapping of Silicon Carbide
Presenter: Mr Jackson Parker - CoorsTek

MixedMode Fracture Modeling in Ceramic Composites via UniaxialDeviatoric Decomposition
Presenter: Dr Arezoo Emdadi - Missouri ST

Authors: Mr Brady Creek - Missouri ST, Mr Lucas Rackers - JHU, Dr Jeremy Watts - Missouri University of Science & Technology